LAMP ACCESSORIES

1/4 Male x 1/8 Female, Brass Finish, Lamp Reducer, Use In Lamps & Ceiling Light Fixtures To Convert From A Larger Size IP Lamp Part To A Smaller Size IP Lamp Nipple.

3/8 Male x 1/4 Female, Brass Finish, Lamp Reducer, Use In Lamps & Ceiling Light Fixtures To Convert From A Larger Size IP Lamp Part To A Smaller Size IP Lamp Nipple.

3/8 Male x 1/8 Female, Brass Finish, Lamp Reducer, Use In Lamps & Ceiling Light Fixtures To Convert From A Larger Size IP Lamp Part To A Smaller Size IP Lamp Nipple,

1/4 IP x 1/4 IP, Solid Brass, Lamp Coupling, Decorative Piece Used In A Lamp To Extend The Length By Connecting Nipples Together.,

1/4 IP x 1/8 IP, Solid Brass, Lamp Coupling, Decorative Piece Used In A Lamp To Extend The Length By Connecting Nipples Of Different Sizes Together.

3/8 Female To 1/8 Female, Brass Finish, Lamp Reducer, Use In Lamps & Ceiling Light Fixtures As An Adapter To Convert From A Larger Size IP Lamp Part To A Smaller Size IP Lamp Nipple.

5", 1/8 IP, Zinc Plated, Lamp Nipple, Use In Repairing Or Making Lighting Fixtures & Lamps, Fit Inside Lighting Fixtures Or Lamps & Is Where The Wiring Or Cord Is Threaded Through, Can Also Be Cut To Size Or Connected With A Coupling Or Reducer To Adjust The Length.

2-1/2", 1/4 IP, Zinc Plated, Lamp Nipple, Use In Repairing Or Making Lighting Fixtures & Lamps, Fit Inside Lighting Fixtures Or Lamps & Is Where The Wiring Or Cord Is Threaded Through, Can Also Be Cut To Size Or Connected With A Coupling Or Reducer To Adjust The Length.

3", 1/4 IP, Zinc Plated, Lamp Nipple, Use In Repairing Or Making Lighting Fixtures & Lamps, Fit Inside Lighting Fixtures Or Lamps & Is Where The Wiring Or Cord Is Threaded Through, Can Also Be Cut To Size Or Connected With A Coupling Or Reducer To Adjust The Length.

3-1/2", 1/4 IP, Zinc Plated, Lamp Nipple, Use In Repairing Or Making Lighting Fixtures & Lamps, Fit Inside Lighting Fixtures Or Lamps & Is Where The Wiring Or Cord Is Threaded Through, Can Also Be Cut To Size Or Connected With A Coupling Or Reducer To Adjust The Length.

2 Pack, 1-1/4", 1/4-27 Thread, Nickel Finish, Pyramid Finial, Add A Decorative Flair To The Top Of A Lamp, While Holding A Lamp Shade In Place.

Brushed Pewter, Lamp Kit, With 10" Harp & Push Through Socket, Includes 1 Each Of The Following: 10" Brushed Pewter Lamp Harp, 8', 18 Gauge Silver Spt-1 Lamp Cord With Polarized Plug, Nickel Finish Push Through Socket, 660W, 250V Rated, 1" 1/4-27 Thread Nickel Finish Finial, Lamp Nipple, Coupling & Lock Nut.

12 Pack, 1/8 IP, Brass Finish, Check Ring, Assorted Sizes, Decorative Highlight To Cover An Opening On A Lamp Or Light Fixture, Use On A Lamp Made From A Bottle To Conceal The Bottle Adapter, Use With A Rubber Washer Over The Glass Shade On A Light Fixture To Cushion The Glass.

3-1/4"D, Brass Finish, Glass Shade Holder, Use To Install A New Light Fixture, 250V Rated, For Use With A Medium Base Bulb, 60W Maximum, Holds A Glass Fitter Shade, Not Included, Which Is Held In Place By Tightening The Fitter Screws, Includes 1 Each Of The Following: Glass Shade Holder With 18 Awg Pre-Wired 6" Insulated Leads, Ground Wire & Insulation, 4" Offset Crossbar & Grounding Screw, 2 Each Of The Following: 8-32 x 1/2" Mounting Screws, 8-32 x 2" Mounting Screws & 3 Each Knurled Screws.

4"D, Brass Finish, Glass Shade Holder, Use To Install A New Light Fixture, 250V Rated, For Use With A Medium Base Bulb, 60W Maximum, Holds A Glass Fitter Shade, Not Included, Which Is Held In Place By Tightening The Fitter Screws, Includes 1 Each Of The Following: Glass Shade Holder With 18 Awg Pre-Wired 6" Insulated Leads, Ground Wire & Insulation, 4" Offset Crossbar & Grounding Screw, 2 Each Of The Following: 8-32 x 1/2" Mounting Screws, 8-32 x 2" Mounting Screws & 3 Each Knurled Screws.